Stainless Steel Splashback | Cut to Size
Cut to Size Stainless Steel Sheet Splashbacks, create a modern look behind kitchen cookers or ranges. Light reflecting properties help to brighten dull kitchen walls.  Extensively used in commercial kitchens due to its easy clean, food grade non porous surface which helps inhibit  bacteria growth.  One sheet install offers a fast and less expensive alternative to tiling!
Designed to be installed on flat interior kitchen walls using industrial adhesive tape or grab adhesive. Please follow our  Stainless Steel Sheet Fitting and Care Instructions
Material: 430 Stainless Steel (Magnetic) is food grade, good for Commercial kitchens  where demand for corrosion resistance is moderately high.
Finish: Brushed DP1 Direction of grain along Width in Horizontal Direction as standard.
Fitting:Â If Corner Holes is selected, use Screws and Screw Caps provided for use in plasterboard. If No Holes is selected use Grab Adhesive, Silicone or VHB Tape on a flat wall. Select based on the type of surface, porous or non porous.
Cleaning: Â Use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth.
Avoid Solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners or coarse abrasives. Clean regular to remove food salts and  acids from building up which may promote corrosion.
Please note that bespoke products may take longer to produce, so you may experience a lead time of 3-5 days before despatch.
Tip: Â Apply a small amount of mineral oil or unscented baby oil to clean splashback with a soft cloth for a shiny finish.
Storage: Â If the installation is not on the same day as delivery, Stainless steel splashbacks are best stored ideally flat or can be stood vertically. Ideally in their original packaging to protect them from damage.
Designed and Manufactured by Displaypro, a UK company specialising in catering equipment since 1997
